Here, please set the channel faders 1-8 and the master fader to "0" dB. Please also make sure that the option "ADAT (1-6) + S/PDIF(coax)" is selected and set for each interface!įurthermore, please configure the "base" MR as follows:
Steinberg nuendo direct monitoring driver#
If not, please take a look whether the Yamaha Steinberg Firewire driver is installed and working properly. Corresponding to the connection set for all MR interfaces, each MR interface should be listed and displayed in the MR-editor. MR816 CSX (1) S/PDIF out -> MR816 X (base) S/PDIF in MR816 CSX (2) S/PDIF out -> MR816 CSX (1) S/PDIF in
MR816 CSX (1) Port 2 -> MR816 CSX (2) Port 2Īccordingly, please connect the S/PDIF jacks from top to bottom ("base"-MR): According to that, please connect the remaining devices as listed in the following scheme: In our example the MR816 X is the "base"-device that is connected to the DAW via Firewire as well. The following setup example consists of two MR816 CSX and one MR816 X to create a recording setup with 24 analogue inputs.įirst of all, please connect the Firewire ports of each single device. Of course it is possible to combine different types of MR interfaces, it makes no difference if you´re using a combination of two MR816 CSX and one MR816 X or just two MR816 X and one MR816 CSX. If you are using more then just one single MR-interface for your recording setup in a "stacked" combination, you´ll need to follow this special setup instruction to assure the no-latency monitoring abilities of the MR-interface.
0 kommentar(er)
